Vanity lights and LED mirrors in Monterey Park
I replace dated vanity lights and install LED mirrors over the sink, level and centered, so you get even light for shaving and makeup. Flicker, dead sections, and touch controls that stopped responding usually come down to a driver or a connection I can track down.
- Typical range
- $150–$400for most repairs confirm
- Time on site
- 1–2 hourstypical confirm
- Visits
- Usually one confirm
- Quote
- Before I startprice first, then the work
What I fix
- Replacing bath bars and sconces over the vanity
- Installing lighted and anti-fog LED mirrors
- Replacing LED drivers and fixing loose connections
- Fixing flicker from dimmers that aren't LED-rated
- Centering and leveling fixtures on the mirror
Problems I see most
- Flicker or buzzing from a failing driver or the wrong dimmer.
- LED mirror sections going dark one strip at a time.
- Touch sensors that stop responding after steam gets in.
Something else going on? Text me a photo and I'll take a look.
How a visit works
- Call or text a photo. Tell me what's wrong and your ZIP code.
- You get a price first. Most vanity lights and LED mirrors jobs I can price from a photo. If I need to see it, I'll say so.
- The visit. Time on site: 1–2 hours. Visits: usually one. confirm
- Parts and cleanup. If parts are needed, you approve the cost before I buy them, and I clean up the work area. confirm
What to have ready
- The new fixture or mirror, or the model you want
- A photo of the vanity, the mirror, and the current light
- Mirror width, and where you want the light centered
- Whether the light is on a dimmer
Photos
Get a price
Show the vanity lights and LED mirrors job with something for scale. I'll reply with a price before any work starts.
Vanity lights and LED mirrors questions
Something else? Call or text and ask.
Sconces or a bar over the mirror?
Sconces on each side at about eye level give the most even light on your face. A bar above the mirror works well too, and fits narrow walls.
What color light is best for a vanity?
Around 3000K to 4000K, with a color rendering index (CRI) of 90 or more, shows skin tones true.
Why is my LED mirror flickering?
Usually the driver or a loose connection. Steam getting behind the glass can do it too. I test it and tell you whether a repair makes sense.
Can you hang a heavy lighted mirror?
Yes. It goes on a French cleat or the maker's bracket, anchored into studs or rated anchors.
Related services
All electrical jobs- Bathroom fansNoisy, weak, or dead bathroom exhaust fans cleaned, repaired, or replaced, with ducts and vent caps cleared so steam leaves the room.
- Outlets, switches, and GFCIsLoose or warm outlets, gritty switches, and GFCIs that trip or fail to reset, replaced.
- Recessed lightingOld, dim can lights brought up to date with LED retrofit kits, new trim, and LED-rated dimmers, without opening the ceiling.
- Ceiling fansNew ceiling fans installed, and wobbly, humming, or dead fans repaired.
- Contact me about this jobCall, text, or send a request with a photo.
Need vanity lights and LED mirrors?
Text a photo of the job with something for scale, and I'll reply with a price. Or call and tell me about it.
Monday through Saturday, 8:30 AM to 7 PM. Closed Sunday. Monterey Park and nearby San Gabriel Valley cities.